[ Team LiB ] Previous Section Next Section

13.6 Shell Scripts

A shell script is simply a file that contains a set of commands to be run by the shell when invoked. By storing commands as a shell script, you make it easy to execute them again and again. As an example, consider a file named deleter, which contains the following lines:

echo -n Deleting the temporary files... 
rm -f *.tmp
echo Done.

The echo commands simply print text on the console. The -n option of the first echo command causes omission of the trailing newline character normally written by the echo command, so both echo commands write their text on a single line. The rm command removes all files having names ending in .tmp from the current working directory.

You can execute this script by issuing the sh command, as follows:

$ sh deleter

If you invoke the sh command without an argument specifying a script file, a new interactive shell is launched. To exit the new shell and return to your previous session, issue the exit command.

If the deleter file were in a directory other than the current working directory, you'd have to type an absolute path, for example:

$ sh /home/bill/deleter

You can make it a bit easier to execute the script by changing its access mode to include execute access. To do so, issue the following command:

$ chmod 555 deleter

This gives you, members of your group, and everyone else the ability to execute the file. To do so, simply type the absolute path of the file, for example:

$ /home/bill/deleter

If the file is in the current directory, you can issue the following command:

$ ./deleter

You may wonder why you can't simply issue the command:

$ deleter

In fact, this still simpler form of the command will work, so long as deleter resides in a directory on your search path. You'll learn about the search path later.

Linux includes several standard scripts that are run at various times. Table 13-2 identifies these and gives the time when each is run. You can modify these scripts to operate differently. For example, if you want to establish command aliases that are available whenever you log in, you can use a text editor to add the appropriate lines to the .profile file that resides in your /home directory. Since the name of this file begins with a dot (.), the ls command won't normally show the file. You must specify the -a option in order to see this and other hidden files.

Table 13-2. Special shell scripts

Script

Function

/etc/profile

Executes when the user logs in

~/.bash_profile

Executes when the user logs in

~/.bashrc

Executes when bash is launched

~/.bash_logout

Executes when the user logs out

If you want to modify one of the standard scripts that should reside in your home directory but find that your /home directory does not contain the indicated file, simply create the file. The next time you log in, log out, or launch bash (as appropriate) the shell will execute your script.

13.6.1 Input/Output Redirection and Piping

The shell provides three standard data streams:

stdin
The standard input stream
stdout
The standard output stream
stderr
The standard error stream

By default, most programs read their input from stdin and write their output to stdout. Because both streams are normally associated with a console, programs behave as you generally want, reading input data from the console keyboard and writing output to the console screen. When a well-behaved program writes an error message, it writes the message to the stderr stream, which is also associated with the console by default. Having separate streams for output and error messages presents an important opportunity, as you'll see in a moment.

Although the shell associates the three standard input/output streams with the console by default, you can specify input/output redirectors that, for example, associate an input or output stream with a file. Table 13-3 summarizes the most important input/output redirectors.

Table 13-3. Input/output redirectors

Redirector

Function

>file

Redirects standard output stream to specified file

2>file

Redirects standard error stream to specified file

>>file

Redirects standard output stream to specified file, appending output to the file if the file already exists

2>>file

Redirects standard error stream to specified file, appending output to the file if the file already exists

&>file

Redirects standard output and error streams to the specified file

2>&1

Combines the standard error stream with the standard output stream

<file

Redirects standard input stream from the specified file

<<text

Reads standard input until a line matching text is found, at which point end-of-file is posted

cmd1 | cmd2

Takes the standard input of cmd2 from the standard output of cmd1 (also known as the pipe redirector)

To see how redirection works, consider the wc command. This command takes a series of filenames as arguments and prints the total number of lines, words, and characters present in the specified files. For example, the command:

$ wc /etc/passwd

might produce the output:

22      26     790 /etc/passwd

which indicates that the file /etc/passwd contains 22 lines, 26 words, and 790 characters. Generally, the output of the command appears on your console. But consider the following command, which includes an output redirector:

$ wc /etc/passwd > total

If you issue this command, you won't see any console output, because the output is redirected to the file total, which the command creates (or overwrites, if the file already exists). If you execute the following commands:

$ wc /etc/passwd > total
$ cat total

you will see the output of the wc command on the console.

Perhaps you can now see the reason for having the separate output streams stdout and stderr. If the shell provided a single output stream, error messages and output would be mingled. Therefore, if you redirected the output of a program to a file, any error messages would also be redirected to the file. This might make it difficult to notice an error that occurred during program execution. Instead, because the streams are separate, you can choose to redirect only stdout to a file. When you do so, error messages sent to stderr appear on the console in the usual way. Of course, if you prefer, you can redirect both stdout and stderr to the same file or redirect them to different files. As usual in the Unix world, you can have it your own way.

A simple way of avoiding annoying output is to redirect it to the null device file, /dev/ null. If you redirect the stderr stream of a command to /dev/null, you won't see any error messages the command produces. For example, the grep command prints an error message if you invoke it on a directory. So, if you invoke the grep command on the current directory (*) and the current directory contains subdirectories, you'll see unhelpful error messages. To avoid them, use a command like this one, which searches for files containing the text "localhost":

$ grep localhost * 2>/dev/null

Just as you can direct the standard output or error stream of a command to a file, you can also redirect a command's standard input stream to a file so the command reads from the file instead of the console. For example, if you issue the wc command without arguments, the command reads its input from stdin. Type some words and then type the end-of-file character (Ctrl-D), and wc will report the number of lines, words, and characters you entered. You can tell wc to read from a file, rather than the console, by issuing a command like:

$ wc </etc/passwd

Of course, this isn't the usual way of invoking wc. The author of wc helpfully provided a command-line argument that lets you specify the file from which wc reads. However, by using a redirector, you could read from any desired file even if the author had been less helpful.

Some programs are written to ignore redirectors. For example, when invoked without special options, the passwd command expects to read the new password only from the console, not from a file. You can compel such programs to read from a file, but doing so requires techniques more advanced than redirectors.

When you specify no command-line arguments, many Unix programs read their input from stdin and write their output to stdout. Such programs are called filters. Filters can be easily fitted together to perform a series of related operations. The tool for combining filters is the pipe, which connects the output of one program to the input of another. For example, consider this command:

$ ls ~ | wc -l

The command consists of two commands, joined by the pipe redirector (|). The first command lists the names of the nonhidden files in the user's home directory, one file per line. The second command invokes wc by using the -l option, which causes wc to print only the total number of lines, rather than printing the total number of lines, words, and characters. The pipe redirector sends the output of the ls command to the wc command, which counts and prints the number of lines in its input, which happens to be the number of files in the user's home directory.

This is a simple example of the power and sophistication of the Unix shell. Unix doesn't include a command that counts the files in the user's home directory and doesn't need to do so. Should the need to count the files arise, a knowledgeable Unix user can prepare a simple script that computes the desired result by using general- purpose Unix commands.

13.6.2 Shell Variables

If you've studied programming, you know that programming languages resemble algebra. Both programming languages and algebra let you refer to a value by a name. And both programming languages and algebra include elaborate mechanisms for manipulating named values.

The shell is a programming language in its own right, letting you refer to variables known as shell or environment variables. To assign a value to a shell variable, you use a command that has the following form:

$  variable=value 

For example, the command:

$ DifficultyLevel=1

assigns the value 1 to the shell variable named DifficultyLevel. Unlike algebraic variable, shell variables can have nonnumeric values. For example, the command:

$ Difficulty=medium

assigns the value medium to the shell variable named Difficulty.

Shell variables are widely used within Unix, because they provide a convenient way of transferring values from one command to another. Programs can obtain the value of a shell variable and use the value to modify their operation, in much the same way they use the value of command-line arguments.

You can see a list of shell variables by issuing the set command. Usually, the command produces more than a single screen of output. So, you can use a pipe redirector and the less command to view the output one screen at a time:

$ set | less

Press the spacebar to see each successive page of output. You'll probably see several of the shell variables described in Table 13-4 among those printed by the set command. The values of these shell variables are generally set by one or another of the startup scripts described earlier in this chapter.

Table 13-4. Important environment variables

Variable

Function

DISPLAY

The X display to be used; for example, localhost:0

HOME

The absolute path of the user's home directory

HOSTNAME

The Internet name of the host

LOGNAME

The user's login name

MAIL

The absolute path of the user's mail file

PATH

The search path (see the upcoming Section 13.6.3)

SHELL

The absolute path of the current shell

TERM

The terminal type

USER

The user's current username; may differ from the login name if the user executes the su command

You can use the value of a shell variable in a command by preceding the name of the shell variable by a dollar sign ($). To avoid confusion with surrounding text, you can enclose the name of the shell variable within curly braces ({ }); it's good practice (though not necessary) to do so consistently. For example, you can change the current working directory to your /home directory by issuing the command:

$ cd ${HOME}

Of course, issuing the cd command with no argument causes the same result. However, suppose you want to change to the /work subdirectory of your home directory. The following command accomplishes exactly that:

$ cd ${HOME}/work

An easy way to see the value of a shell variable is to specify the variable as the argument of the echo command. For example, to see the value of the HOME shell variable, issue the command:

$ echo ${HOME}

To make the value of a shell variable available not just to the shell, but to programs invoked by using the shell, you must export the shell variable. To do so, use the export command, which has the form:

$ export  variable 

where variable specifies the name of the variable to be exported. A shorthand form of the command lets you assign a value to a shell variable and export the variable in a single command:

$ export  variable=value 

You can remove the value associated with a shell variable by giving the variable an empty value:

$  variable= 

However, a shell variable with an empty value remains a shell variable and appears in the output of the set command. To dispense with a shell variable, you can issue the unset command:

$ unset  variable 

Once you unset the value of a variable, the variable no longer appears in the output of the set command.

13.6.3 The Search Path

The special shell variable PATH holds a series of paths known collectively as the search path. Whenever you issue an external command, the shell searches the paths that comprise the search path, seeking the program file that corresponds to the command. The startup scripts establish the initial value of the PATH shell variable, but you can modify its value to include any desired series of paths. You must use a colon (:) to separate each path of the search path. For example, suppose that PATH has the following value:

/usr/bin:/bin:/usr/local/bin:/usr/bin/X11:/usr/X11R6/bin

You can add a new search directory, say /home/bill, by issuing the following command:

$ PATH=${PATH}:/home/bill

Now, the shell will look for external programs in /home/bill as well as in the default directories. However, the problem is that the shell will look there last. If you prefer to check /home/bill first, issue the following command instead:

$ PATH=/home/bill:${PATH}

The which command helps you work with the PATH shell variable. It checks the search path for the file specified as its argument and prints the name of the matching path, if any. For example, suppose you want to know where the program file for the wc command resides. Issuing the command:

$ which wc

will tell you that the program file is /usr/bin/wc (or whatever other path is correct for your system).

13.6.4 Quoted Strings

Sometimes the shell may misinterpret a command you've written, globbing a filename or expanding a reference to a shell variable that you hadn't intended. Of course, it's actually your interpretation that's mistaken, not the shell's. Therefore, it's up to you to rewrite your command so the shell's interpretation is congruent with what you intended.

Quote characters, described in Table 13-5, can help you by controlling the operation of the shell. For example, by enclosing a command argument within single quotes, you can prevent the shell from globbing the argument or substituting the argument with the value of a shell variable.

Table 13-5. Quote characters

Character

Function

' (single quote)

Characters within a pair of single quotes are interpreted literally; that is, their metacharacter meanings (if any) are ignored. Similarly, the shell does not replace references to shell or environment variables with the value of the referenced variable.

" (double quote)

Characters within a pair of double quotes are interpreted literally; that is, their metacharacter meanings (if any) are ignored. However, the shell does replace references to shell or environment variables with the value of the referenced variable.

´ (backquote)

Text within a pair of backquotes is interpreted as a command, which the shell executes before executing the rest of the command line. The output of the command replaces the original backquoted text.

\ (backslash)

The following character is interpreted literally; that is, its metacharacter meaning (if any) is ignored. The backslash character has a special use as a line continuation character. When a line ends with a backslash, the line and the following line are considered part of a single line.

To see quoted characters in action, consider how you might cause the echo command to produce the output $PATH. If you simply issue the command:

$ echo $PATH

the echo command prints the value of the PATH shell variable. However, by enclosing the argument within single quotes, you obtain the desired result:

$ echo '$PATH'

Double quotes have a similar effect. They prevent the shell from globbing a filename but permit the expansion of shell variables.

Backquotes operate differently; they let you execute a command and use its output as an argument of another command. For example, the command:

$ echo My home directory contains ´ls ~ | wc -l´ files.

prints a message that gives the number of files in the user's /home directory. The command works by first executing the command contained within backquotes:

$ ls ~ | wc -l

This command, as explained earlier, computes and prints the number of files in the user's directory. Because the command is enclosed in backquotes, its output is not printed; instead the output replaces the original backquoted text.

The resulting command becomes:

echo My home directory contains 22 files.

When executed, this command prints the output:

My home directory contains 22 files.

You may now begin to appreciate the power of the Linux shell: by including command aliases in your bashrc script, you can extend the command repertoire of the shell. And, by using filename completion and the history list, you can reduce the amount of typing it takes to enter frequently used commands. Once you grasp how to use it properly, the Linux shell is a powerful, fast, and easy-to-use interface that avoids the limitations and monotony of the more familiar point-and-click graphical interface.

But the shell has additional features that extend its capabilities even further. As you'll see in the next section, the Linux shell includes a powerful programming language that provides argument processing, conditional logic, and loops.

    [ Team LiB ] Previous Section Next Section