Team LiB   Previous Section   Next Section

4.1 Using a Practical Project Workspace

In the course of developing and customizing software for your target, you will need to organize various software packages and project components in a comprehensive and easy-to-use directory structure. Table 4-1 shows a suggested directory layout you may find useful. Feel free to modify this structure to fit your needs and requirements. When deciding where to place components, always try to find the most intuitive layout. Also, try to keep your own code in a directory completely separated from all the packages you will download from the Net. This will minimize any confusion regarding the source's ownership and licensing status.

Table 4-1. Suggested project directory layout

Directory

Content

bootldr

The bootloader or bootloaders for your target

build-tools

The packages and directories needed to build the cross-platform development toolchain

debug

The debugging tools and all related packages

doc

All the documentation you will need for your project

images

The binary images of the bootloader, the kernel, and the root filesystem ready to be used on the target

kernel

The different kernel versions you are evaluating for your target

project

Your own source code for this project

rootfs

The root filesystem as seen by the target's kernel at runtime

sysapps

The system applications required for your target

tmp

A temporary directory to experiment and store transient files

tools

The complete cross-platform development toolchain and C library

Of course, each of these directories contains many subdirectories. We will populate these directories as we continue through the rest of the book.

The location of your project workspace is up to you, but I strongly encourage you not to use a system-wide entry such as /usr or /usr/local. Instead, use an entry in your home directory or a directory within the /home directory shared by all the members of your group. If you really want to have a system-wide entry, you may want to consider using an entry in the /opt directory. For the example embedded control system, I have the following layout in my home directory:

$ ls -l ~/control-project
total 4
drwxr-xr-x   13 karim    karim        1024 Mar 28 22:38 control-module
drwxr-xr-x   13 karim    karim        1024 Mar 28 22:38 daq-module
drwxr-xr-x   13 karim    karim        1024 Mar 28 22:38 sysmgnt-module
drwxr-xr-x   13 karim    karim        1024 Mar 28 22:38 user-interface

Since they all run on different targets, each control system component has a separate entry in the control-project directory in my home directory. Each entry has its own project workspace as described above. Here is the daq-module workspace for example:

$ ls -l ~/control-project/daq-module
total 11
drwxr-xr-x    2 karim    karim        1024 Mar 28 22:38 bootldr
drwxr-xr-x    2 karim    karim        1024 Mar 28 22:38 build-tools
drwxr-xr-x    2 karim    karim        1024 Mar 28 22:38 debug
drwxr-xr-x    2 karim    karim        1024 Mar 28 22:38 doc
drwxr-xr-x    2 karim    karim        1024 Mar 28 22:38 images
drwxr-xr-x    2 karim    karim        1024 Mar 28 22:38 kernel
drwxr-xr-x    2 karim    karim        1024 Mar 28 22:38 project
drwxr-xr-x    2 karim    karim        1024 Mar 28 22:38 rootfs
drwxr-xr-x    2 karim    karim        1024 Mar 28 22:38 sysapps
drwxr-xr-x    2 karim    karim        1024 Mar 28 22:38 tmp
drwxr-xr-x    2 karim    karim        1024 Mar 28 22:38 tools

Because you may need to provide the paths of these directories to some of the utilities you will build and use, you may find it useful to create a short script that sets appropriate environment variables. Here is such a script called develdaq for the DAQ module:

export PROJECT=daq-module
export PRJROOT=/home/karim/control-project/${PROJECT}
cd $PRJROOT

In addition to setting environment variables, this script moves you to the directory containing the project. You can remove the cd command if you would prefer not to be moved to the project directory right away. To execute this script in the current shell so that the environment variables are immediately visible, type:[1]

[1] All commands used in this book assume the use of the sh or bash shell, because these are the shells most commonly used. If you use another shell, such as csh, you may need to modify some of the commands accordingly.

$ . develdaq

Future explanations will rely on the existence of the PROJECT and PRJROOT environment variables.

Since the distribution on your workstation has already installed many of the same packages you will be building for your target, it is very important to clearly separate the two types of software. To ensure such separation, I strongly encourage you not to carry out any of the instructions provided in the rest of this book while being logged in as root, unless I provide explicit instructions otherwise. Among other things, this will avoid any possible destruction of the native GNU toolchain installed on your system and, most importantly, the C library most of your applications rely on. Therefore, instead of logging in as root, log in using a normal user account with no particular privileges.

    Team LiB   Previous Section   Next Section