Book HomeLinux in a NutshellSearch this book

Chapter 5. Red Hat and Debian Package Managers

Contents:

The Red Hat Package Manager
The Debian Package Manager

This chapter describes the two major Linux packaging systems, the Red Hat Package Manager (RPM) and the Debian GNU/Linux Package Manager.

When you want to install applications on your Linux system, most often you'll find a binary or a source package containing the application you want, instead of (or in addition to) a .tar.gz file. A package is a file containing the files necessary to install an application. But note that while the package contains the files you need for installation, the application might require the presence of other files or packages that are not included, such as particular libraries (and even specific versions of the libraries), in order to be able to run. Such requirements are known as dependencies.

Package management systems offer many benefits. As a user, you may find you want to query the package database to find out what packages are installed on the system and their versions. As a system administrator, you need tools to install and manage the packages on your system. And, if you are also a developer, you need to know how to build a package for distribution.

Among other things, package managers:

Any user can list or query packages. However, installing, upgrading, or removing packages generally requires superuser privileges. This is because the packages normally are installed in systemwide directories that are writable only by root. Sometimes you can specify an alternate directory, to install, for example, a package into your home directory or into a project directory where you have write permission.

Both RPM and the Debian Package Manager back up old files before installing an updated package. Not only does this let you go back if there is a problem, but also if you've made changes (to configuration files, for example), they aren't completely lost.

5.1. The Red Hat Package Manager

The Red Hat Package Manager (RPM) is a freely available packaging system for software distribution and installation. In addition to Red Hat and Red Hat-based distributions, both SuSE and Caldera are among the Linux distributions that use RPM.

Using RPM is straightforward. A single command, rpm, has options to perform all the package functions. For example, to find out if the Emacs editor is installed on your system, you could say:

% rpm -q emacs
emacs-20.4-4

In addition, the GNOME-RPM program provides an X-based graphical frontend to RPM (that can be run even if you are not running GNOME). This section describes the rpm command and then the gnorpm command that runs GNOME-RPM.

5.1.1. The rpm Command

RPM packages are built, installed, and queried with the rpm command. RPM package names usually end with a .rpm extension. rpm has a set of modes, each with its own options. The format of the rpm command is:

rpm [options] [packages]
With a few exceptions, as noted in the lists of options that follow, the first option specifies the rpm mode (e.g., install, query, update, build, etc.), and any remaining options affect that mode.

In the option descriptions that refer to packages, you'll sometimes see them specified as package-name and sometimes as package-file. The package name is the name of the program or application, such as gif2png. The package file is the name of the RPM file: gif2png-2.2.5-1.i386.rpm.

RPM provides a configuration file for specifying frequently used options. The system configuration file is usually /etc/rpmrc, and users can set up their own $HOME/.rpmrc file. You can use the --showrc option to show the values RPM will use for all the options that may be set in an rpmrc file:

rpm --showrc

The rpm command includes FTP and HTTP clients, so you can specify an ftp:// or http:// URL to install or query a package across the Internet. You can use an FTP or HTTP URL wherever package-file is specified in the commands presented here.

Any user can query the RPM database. Most of the other functions require superuser privileges.

5.1.1.1. General options

The following options can be used with all modes:

--dbpath path

Use path as the path to the RPM database.

--ftpport port

Use port as the FTP port.

--ftpproxy host

Use host as a proxy server for all transfers. Specified if you are FTPing through a firewall system that uses a proxy.

--help

Print a long usage message (running rpm with no options gives a shorter usage message).

--justdb

Update only the database; don't change any files.

--pipe command

Pipe the rpm output to command.

--quiet

Display only error messages.

--rcfile filename

Use filename as the configuration file instead of the system configuration file /etc/rpmrc or $HOME/.rpmrc.

--root dir

Perform all operations within directory dir.

--version

Print the version number of rpm.

-vv

Print debugging information.

5.1.1.2. Install, upgrade, and freshen options

Install or upgrade an RPM package. The syntax of the install command is:

rpm -i [install-options] package_file ... 
rpm --install [install-options] package_file ...

To install a new version of a package and remove an existing version at the same time, use the upgrade command instead:

rpm -U [install-options] package_file ... 
rpm --upgrade [install-options] package_file ...

One feature of -U is that if the package doesn't already exist on the system, it acts like -i and installs it. To prevent that behavior, you can freshen a package instead; in that case, rpm upgrades the package only if an earlier version is already installed. The freshen syntax is:

rpm -F [install-options] package_file ...
rpm --freshen [install-options] package_file ...

Installation and upgrade options are:

--allfiles

Install or upgrade all files.

--badreloc

Used with --relocate to force relocation even if the package is not relocatable.

--excludedocs

Don't install any documentation files.

--excludepath path

Don't install any file whose filename begins with path.

--force

Force the installation. Equivalent to using --replacepkgs, --replacefiles, and --oldpackage.

-h, --hash

Print 50 hash marks as the package archive is unpacked. Use with --version for a nicer display.

--ignorearch

Install even if the binary package is intended for a different architecture.

--ignoreos

Install binary package even if the operating systems don't match.

--ignoresize

Don't check disk space availability before installing.

--includedocs

Install documentation files. This is needed only if excludedocs: 1 is specified in an rpmrc file.

--nodeps

Don't check whether this package depends on the presence of other packages.

--noorder

Don't reorder packages to satisfy dependencies before installing.

--noscripts

Don't execute any preinstall or postinstall scripts.

--notriggers

Don't execute any scripts triggered by package installation.

--oldpackage

Allow an upgrade to replace a newer package with an older one.

--percent

Print percent-completion messages as files are unpacked.

--prefix path

Set the installation prefix to path for relocatable packages.

--replacefiles

Install the packages even if they replace files from other installed packages.

--replacepkgs

Install the packages even if some of them are already installed.

--test

Go through the installation to see what it would do, but don't actually install the package.

5.1.1.3. Query options

The syntax for the query command is:

rpm -q[information-options] [package-options]
rpm --query[information-options] [package-options]

There are two subsets of query options: package selection options that determine what packages to query and information selection options that determine what information to provide.

5.1.1.8. Miscellaneous options

Several additional rpm options are available:

--querytags

Print the tags available for use with the --queryformat option in query mode.

--setgids packages

Set file owner and group of the specified packages to those in the database.

--setperms packages

Set file permissions of the specified packages to those in the database.

--showrc

Show the values rpm will use for all options that can be set in an .rpmrc file.

5.1.1.10. Build options

The syntax for the build options is:

rpm -[b|t]step [build-options] spec-file ...
Specify -b to build a package directly from a spec file or -t to open a tarred gzipped file and use its spec file. Both forms take the following single-character step arguments:

p

Perform the prep stage, unpacking source files and applying patches.

l

Do a list check, expanding macros in the files section of the spec file and verifying that each file exists.

c

Perform the build stage. Done after the prep stage; generally equivalent to doing a make.

i

Perform the install stage. Done after the prep and build stages; generally equivalent to doing a make install.

b

Build a binary package. Done after prep, build, and install.

s

Build a source package. Done after prep, build, and install.

a

Build both binary and source packages. Done after prep, build, and install.

The following additional options can be used when building an rpm file:

--buildarch arch
--buildos os

For use with pre-3.0 versions of RPM. Build the package for architecture arch or the operating system os. Replaced in 3.0 with --target.

--buildroot dir

Override the BuildRoot tag with dir when building the package.

--clean

Clean up (remove) the build files after the package has been made.

--rmsource

Remove the source files and the spec file when the build is done. Can be used as a standalone option with rpm to clean up files separately from creating the packages.

--short-circuit

Can be used with -bc and -bi to skip previous stages.

--sign

Add a PGP signature to the package.

--target platform

When building the package, set the macros _target, _target_arch, and _target_os to the value indicated by platform.

--test

Go through the motions, but don't execute any build stages. Used for testing spec files.

--timecheck

Set the timecheck age (the maximum age in seconds of a file being packaged). Set to 0 to disable.

Two other options can be used standalone with rpm to recompile or rebuild a package:

--rebuild source-pkgfile...

Like --recompile, but also build a new binary package. Remove the build directory, the source files, and the spec file once the build is complete.

--recompile source-pkgfile...

Install the named source package, and prep, compile, and install the package.

5.1.1.11. RPM examples

Query the RPM database to find Emacs-related packages:

% rpm -q -a | grep emacs

Query an uninstalled package, printing information about the package, and list the files it contains:

% rpm -qpil ~/downloads/bash2-doc-2.03-8.i386.rpm

Install a package (assumes superuser privileges):

% rpm -i sudo-1.5.3-6.i386.rpm

5.1.2. GNOME-RPM

GNOME-RPM is a graphical user frontend to rpm that runs under X. You can run gnorpm even if you are not running GNOME. When you run gnorpm, it opens a window that lets you manage your rpm packages via a graphical interface. The format of the gnorpm command is:

gnorpm [options]

5.1.2.1. gnorpm options

The gnorpm options are:

--geometry=geom

Specify the geometry of the main window in standard X geometry format (i.e., w×h+x+y).

-i pkgfiles, --install pkgfiles

Install the specified packages.

-p pkgs, --packages pkgs

The packages are in files, not in the rpm database (i.e., they haven't been installed yet).

-q pkgs, --query pkgs

Display a query window for the specified installed packages.

-qp pkgfiles, --query --packages pkgfiles

Display a query window for the specified package files. This is the same as specifying the -q and -p options.

-U pkgfiles, --upgrade pkgfiles

Upgrade the specified packages.

-K pkgfiles, --checksig pkgfiles

Check the signatures on the specified packages.

-y pkgs, --verify pkgs

Verify the specified packages.

-?, --help

Display a help message and exit.

--root=dir

Specify the filesystem root to use.

--usage

Display a brief usage message and exit.

5.1.2.2. The GNOME-RPM window

The GNOME-RPM main window has five parts. At the top is a menu bar with three buttons:

Packages

Menu options are Query, Uninstall, and Verify.

Operations

Menu options are Find, Web find, Install, and Preferences.

Help

Provides online help for GNOME-RPM.

Below the menu bar is a toolbar, with buttons to Install, Unselect, Uninstall, Query, Verify, Find, and Web find. At the very bottom of the window is a status bar.

The rest of the window is the main panel. On the left is the package panel, which displays package folders in a tree structure. Clicking on a folder selects it; double-click to display the contents of the folder (i.e., the packages in that folder) on the righthand panel. Clicking on a package selects it; you then can use the menus and the toolbar buttons to operate on the package. You can select several packages at the same time and operate on them as a group. Right-clicking on a package icon selects the package if it isn't already and presents a menu with Query, Uninstall, and Verify options.

See the GNOME-RPM documentation and online help for full details.



Library Navigation Links

Copyright © 2001 O'Reilly & Associates. All rights reserved.

This HTML Help has been published using the chm2web software.