Book HomeMySQL and mSQLSearch this book

18.2. Lite

Lite is the scripting language used by W3-mSQL. In syntax, it is similar to C and even more to Perl. In fact, many Lite scripts are syntactically indistinguishable from Perl scripts. Lite, however, lacks many of the advanced features of Perl.

Below is a quick reference of the standard Lite functions that are available when using W3-mSQL.

chdir

$result = chdir($path)

Changes directory to the specified path. If the operation is unsuccessful, a negative integer is returned.

chmod

$result = chmod($filename, $mode)

Changes the mode of the specified file to mode. If the operation is unsuccessful, a negative integer is returned. The value mode can be given as a decimal, octal or hexadecimal value.

chop

$string = chop($string)

Returns the string with the last character removed. This is handy for removing newlines from the end of strings read with readln.

close

close ($fd)

Closes the file associated with the file descriptor.

ctime

$time = ctime($time)

Converts time, which is some number of seconds since the epoch, into the common Unix text representation of the time.

echo

FM-Command>echo($string)

Prints the given string. Any variables in the string will be replaced with the values of the variables.

fprintf

fprintf($fd, $string [, arg ...])

Works like the C (or Perl) function of the same name. The first argument is a file descriptor. The formatted string is printed to the file associated with the file descriptor.

gethostbyaddr

$hostinfo = gethostbyaddr($address) 

Returns the same array as gethostbyname() for given IP number. The IP should be given as a decimal string, as in "127.0.0.1". In the official W3-mSQL documentation, this function is referred to as both gethostbyaddr and gethostbyaddress. At the time of this writing gethostbyaddress is incorrect and does not exist as a function in W3-mSQL.

gethostbyname

$hostinfo = gethostbyname($host) 

Returns an array of information about the given host. The first element of the array is the name of the host and the second is the IP number.

getpid

$pid = getpid()

Returns the process ID of the Lite program.

getpwnam

$entry = getpwnam($username)

Returns an array of information about the user with the username username. The fields of the array are as follows:

  1. Username

  2. Password

  3. UID

  4. GID

  5. GECOS (Full name and other optional information)

  6. Home directory

  7. Shell

getpwuid

$entry = getpwuid($UID)

Returns an array identical to that of getpwnam for the user with the user ID $UID.

includeFile

includeFile($filename)

This function includes the file filename into the output of the program. The file is not modified or parsed in any way.

kill

$result = kill($pid, $signal)

Sends the signal signal to the process pid. If the operation is unsuccessful, a negative integer is returned.

link

$result = link($file, $newlinkname)

Creates a `hard' link from file to newlinkname. If the operation is unsuccessful, a negative integer is returned.

mkdir

$result = mkdir($directoryname)

Creates a directory with the given name. If the operation is unsuccessful, a negative integer is returned.

msqlConnect

$socket = msqlConnect($host)

Connects to the mSQL server on the host host. The return value is the socket number used in a subsequence communication with the database server. If unsuccessful, a negative integer is returned.

msqlClose

msqlClose($socket) 

Terminates the connection identified by socket.

msqlDataSeek

msqlDataSeek($result, $location)

This places the `pointer' for result immediately before the row location. Setting the location to 0 puts the pointer at the beginning of the data. The next call to msqlFetchRow will retrieve the row after location.

msqlEncode

$string = msqlEncode($string)

This function returns a copy of string that is safely encoded for use in a mSQL query.

msqlFetchRow

$row = msqlFetchRow($result)

This function returns the next row of available data in result as an array.

msqlFieldSeek

msqlFieldSeek($result, $location)

This changes the `pointer' of a result generated by msqlInitFieldList in the same way that msqlDataSeek effects results from msqlStoreResult.

msqlFreeResult

msqlFreeResult($result)

This frees any memory used by a result retrieved with msqlStoreResult. This function must be called for each result when you are finished with it.

msqlInitFieldList

$result = msqlInitFieldList($socket, $database, $table)

This creates a table of information about the table table in the database database on the server indicated by socket.

msqlListDBs

$databases = msqlListDBs($socket)

Returns an array of the names of all of the databases available on the server indicated by socket.

msqlListField

$tableinfo = msqlListField($result)

Returns an array of information about the next field in the table generated from msqlInitFieldList, indicated by result. Each successive call to msqlListField produces a new array until there are no more fields left. The array consists of the following fields:

0

Field Name

1

Table Type

2

Type

3

Length

4

Flags

msqlListTables

$tables = msqlListTables($socket, $database)

Returns an array of the names of the tables available on database on the server indicated by socket.

msqlNumRows

msqlNumRows($result)

Returns the number of rows of data contained in the result result.

msqlQuery

$result = msqlQuery($socket, $query)

This attempts to send to query query to the connection socket. If the query was not successfully executed, a negative integer is returned.

msqlSelectDB

$result = msqlSelectDB($socket, $database)

This function attempts to set the connection socket to use the database database. If unsuccessful, a negative integer is returned.

msqlStoreResult

$result = msqlStoreResult

Retrieves any data that was produced by the last msqlQuery call and stores it for access and manipulation.

open

$fd = open($file, $mode)

This function opens the given file using the given mode and associates a file descriptor with the file. The defined modes are as follows:

>

Open the file for writing.

<

Open the file for reading.

<>

Open the file for reading or writing.

<P

Create a named pipe and open it for reading.

>P

Create a named pipe and open it for writing.

<|

Execute the file as a command and read the output.

>|

Execute the file as a command and write to the process.

pid

$pid = getppid()

Returns the process ID of the process that is the parent of the Lite program.

printf

printf($string [, arg, ... ])

This works like the C (or Perl) function of the same name. Variables in the string are not substituted; standard C `%s' format must be used to insert variables into the string.

read

$data = read($fd, $length)

Read length number of bytes from the specified file descriptor.

readln

$line = readln($fd)

Read the next line from the specified file descriptor.

readtok

$data = readtok($fd, $token)

Read data from the specified file descriptor until the token is encountered. Only the first character of token is used.

rename

$result = rename($oldname, $newname)

This attempts to rename of the specified file (or directory) from oldname to newname. If the operation is unsuccessful, a negative integer is returned.

rmdir

$result = rmdir($path)

This attempts to remove the given directory. If the operation is unsuccessful, a negative integer is returned.

setContentType

setContentType($string)

This function overrides the default content type of HTML page containing the script and uses string in its place. This function must be the very first line in the document to work. Not even a blank line can precede it.

sleep

sleep($time)

This stops the program for time number of seconds.

split

$strings = split($string, $token)

Splits the given string by the token character into an array of strings.

stat

$stat = stat($file)

Returns an array of information about file. The elements of the array are as follows:

  1. Inode number

  2. File mode

  3. Number of links to file

  4. UID

  5. GID

  6. Size of file

  7. Atime

  8. Mtime

  9. Ctime

  10. Block size of file system (in bytes)

  11. Number of file system block used

strftime

$time = strftime($format, $time)

This converts a Unix time into a text representation of the time using format as a guide. Any of the following sequences in format are replaced with their corresponding value:

%a

Day of week, using locale's abbreviated weekday names

%A

Day of week, using locale's full weekday names

%b

Month, using locale's abbreviated month names

%B

Month, using locale's full month names

%d

Day of month (01-31)

%D

Date as %m/%d/%y

%e

Day of month (1-31 with single digits preceded by a space)

%H

Hour (00-23)

%I

Hour (00-12)

%j

Day of year (001-366)

%k

Hour (0-23, blank padded)

%l

hour (1-12, blank padded)

%m

Month number (01-12)

%M

Minute (00-59)

%p

AM or PM

%S

Seconds (00-59)

%T

Time as %H:%M:%S

%U

Week number in year (01-52)

%w

Day of week (0-6, Sunday being 0)

%y

Year within the century (00-99)

%Y

Year including century (e.g., 1999)

strseg

$string = strseg($string, $start, $end)

Returns the substring of the given string which starts at start characters and ends at end characters from the beginning of the string.

sub

$string = sub($string, $expr1, $expr2)

This substitutes any occurrences of expr1 in string with expr2. The values of expr1 and expr2 may differ in length; string will be lengthened or shortened automatically.

substr

$string = substr($string1, $regexp, $string2)

This finds the substrings of string1 that match the regular expression regexp. For each part of the regular expression enclosed in parenthesis that matches, the corresponding variable $1, $2, $3, etc. is set with the value of the match. The value of string2 is returned with variables (including $1, $2, $3, etc.) expanded.

symlink

$result = symlink($file, $newlinkname)

This attempts to create a symbolic link from file to newlinkname. This function is only supported on some operating systems. If the operation is unsuccessful, a negative integer is returned.

system

$result = system($command)

This function spawns a shell and executes command. Any output of the command is redirected to the output of the program.

test

$result = test($test, $filename)

This performs the test test on the file filename. If the test is successful, 1 is returned, otherwise is returned. The available tests are as follows:

b

Block mode device

c

Character mode device

d

Directory

p

Named pipe

s

Nonempty regular file

f

Regular file

u

Setuid file

g

Setgid file

time

$time = time()

Returns the number of seconds since the epoch (00:00:00 GMT, Jan. 1, 1970).

time2unixtime

$time = time2unixtime($sec, $min, $hour, $day, $month, $year)

This converts the values for a time into the Unix form of the time (which is the number of seconds since the epoch).

tr

$string = tr($string, $list1, $list2)

Substitutes all of the characters in list1 that exist in string with the equivalent character in list2 (e.g., tr("Robby","oy","ai") would return the string "Rabbi"). The list of characters can contain a range of characters separated with "-". For instance, tr("e.e. cummings", "a-z," "A-Z") will return the string "E.E. CUMMINGS."

truncate

$result = truncate($file, $length)

This attempts to truncate the given file to length bytes. This is usually used to create a zero-length file. If the operation is unsuccessful, a negative integer is returned.

umask

umask($mask)

This sets the umask of the current process to mask. The value mask can be given in decimal, octal, or hexadecimal.

unixtime2*

$year = unixtime2year($time)
$month = unixtime2month($time)
$day = unixtime2day($time)
$hour = unixtime2hour($time)
$min = unixtime2min($time)
$sec = unixtime2sec($time)

These functions take a Unix time value and return the requested value. For example, unixtime2day(time()), would return the current day of the month (a value between 1 and 31).

unlink

$result = unlink("filename")

This deletes the specified file. If the operation is unsuccessful, a negative integer is returned.

urlEncode

$string = urlEncode($string)

This function returns a copy of string that is safely encoded for insertion into a URL.



Library Navigation Links

Copyright © 2001 O'Reilly & Associates. All rights reserved.

This HTML Help has been published using the chm2web software.